| All of the Exidor Touchbar range
has been certified to BS EN 1125 and are non-handed. Classification No.
37601322B.
The Touchbar range includes a dogging device
as standard operated by the allen key supplied.
All Exidor Touchbars also have features such
as the pad fitting over the mechanism unit and the angled lip, which prevent
the units being jammed intentionally.
The horizontal bar also includes cut outs to
grip the unit to be able to pull the door shut after use. Both the single
deadlocking latch units and the three point locking units also include
an anti-thrust.
Exidor 400
Touchbar Deadlocking Latch to suit doors up to 900mm wide.
Exidor 401
Touchbar Deadlocking Latch to suit doors up to 1200mm wide.
Exidor 402
Touchbar two point locking with Vertical catches for doors up to 900mm
wide.
Exidor 403
Touchbar two point locking with Vertical catches for doors up to 1200mm
wide.
Exidor 404
Touchbar three point locking - to suit doors up to 900mm wide and
2440mm high.
Exidor 405
Touchbar three point locking - to suit doors up to 1200mm wide and
2440mm high.
Note: For doors that have a glass panel it is
recommended that a diagram showing the position of the glass panel is
supplied with the order so that the units can be cut to the correct size.
Technical Data
Construction
Main body and Touch Bar are of rolled steel section. The internal
components are zinc plated steel and pressure diecast aluminum. The latch
bolt and catches are stainless steel with the catch covers in die cast
aluminum.
Finishes
Silver only with a choice of epoxy powder coated granite silver, gold,
black or white available on request. Plated finishes are also available.
Standard sizes
Exidor 400, 402, 404 - to suit doors up to 900mm wide.
Exidor 401, 403, 405 - to suit doors up to 1200mm wide.
As supplied, will suite door height up to 2440mm
with special sizes available upon request.
The Exidor Touchbars have the advantage that
special sizes can be supplied directly by FD, thus eliminating any adjustments
on site, which can lead to components being mislaid or the Touchbars being
reassembled incorrectly.
Applications
The Exidor range of Touchbars are suitable for application on doors
of timber or metal construction. For flush fitting doors and frames see
keep options. For double door applications see the product identifier
or contact Gainsborough.
Optional Accessories
Exidor 409 Outside Access Device with a Locking Knob.
Exidor 410 Outside Access Device with a Lever Handle.
Exidor 406 Keep for Double Door Applications.
|