| Features
All Gainsborough 1000,2000 & 3000 Series mortice locks and latches
have unique design concepts to meet with the reliability and durability
needs required by Australian Standards.
The Gainsborough 2000 & 3000 Series is available
featuring the cylinder below the lever or knob in the functions of vestibule
and combination locks and latches.
1000 Series deadlock and sliding door locks
are also available to match.
Applications
Commercial applications where heavy duty locks or latches are required
to meet varying standards of durability and security needs.
Residential applications including: apartment entries, homes, unit entries.
Backsets
Standard backset 23mm (2000 Series)
Lock Case
Zinc Alloy case with Nickel Plate finish for corrosion resistance.
Finishes
SS Satin Stainless Steel faceplates and strikes
PB Polished Brass faceplates and strikes
PS Polished Stainless Steel faceplates and strikes
Door Range
Suits 32mm to 48mm
Refer dimensions for aluminum doors (2000 Series)
For thicker doors refer to factory prior to ordering
Latchbolts
Latchbolts are 14mm. Sintered Stainless Steel for latching type locks
& latches and feature an auxiliary bolt which deadlatches the main
latchbolt upon closing of the door.
Latchbolt and auxiliary deadlatch bolt can be reversed easily for doors
opening in or out.
Door Clearance
To maintain lock security and facilitate correct latch retraction, clearance
between door and frame should be 2.5mm –4mm.
The Gainsborough 2000 & 3000 Series has positive deadlatching up to
10mm.
Furniture Fixing
Long plate furniture for both 2000 and 3000 Series locking latches and
latches is available.
Multi Function
Multi -function is achieved by simply sliding a switch on either side
of the lock case, thus changing the lock from combination function (both
lever/knobs locked on outside and inside of case) to vestibule function
(one lever/knob locked with other lever/knob operable at all times, normally
egress.)
Lock case does not need to be disassembled to achieve either of the above
functions.
Electric
Strikes
The Gainsborough 1000,2000 & 3000 Series mortice lock suits
the Gainsborough ES1000SS Electric Strike and is compatible with
most other electric strikes available. |
|
Cylinders
Cylinders are oval type used in Australian mortice locks and can be interchanged
with other specially keyed cylinders. Cylinders can be supplied with or
without the lock. Gainsborough C4/6 pin standard profile, straight six
restricted profile or the GR9/5 pin profile to match other Gainsborough
products. Unlike other Australian type mortice locks, the Gainsborough
2000 and 3000 Series range of locking latches feature the cylinder below
the handle/knob for convenience.
|